Atlas down-locking reel seat 3-6 with fighting butt (Assorted inserts)
Adding a fighting butt to a down-locking reel seat often requires drilling out an end cap and then trying to inlet a fighting butt to the profile of a sometime irregular shaped end cap. The new Atlas down-locking seat 3-6 seat with fighting butt is ready to install right out of the box. The seat comes complete with: Threaded hardware, trim band (cork check), insert, and fighting butt.
Fighting butts shown (from left to right) cork/eva, cork/cork rubber, EVA.
*Note: if using a stent to install the seat its a good idea to go with the longer size to accommodate the fighting butt.
Specs:
OD: .647"
Length: 4.5"